Delo Heavy Duty Motor Oils

.      

Buy Chevron in Bulk

Delo 400 XLE SAE 10W-30

Delo® 400 XLE SAE 10W-30 with ISOSYN® Advanced Technology is a fuel-efficient, mixed-fleet motor oil designed for naturally aspirated and turbocharged four-stroke diesel engines, as well as four-stroke gasoline engines, where API CK-4 or SN and SAE 10W-30 are specified. It is formulated for severe service and a wide range of operating conditions. This oil delivers excellent performance in both new, advanced engines meeting the latest emissions and reliability standards and in engines equipped with technologies such as four-valve heads, supercharging or turbocharging, direct injection, higher power density, intercooling, full electronic fuel and emissions management, selective catalytic reduction, exhaust gas recirculation, and diesel particulate filters.

Delo 400 SDE SAE 15W 40

Delo® 400 SDE SAE 15W-40 with ISOSYN® Advanced Technology is a mixed-fleet motor oil designed for naturally aspirated and turbocharged four-stroke diesel engines, as well as four-stroke gasoline engines, where API CK-4 or SN and SAE 15W-40 are specified. It is formulated for severe service and a wide range of operating conditions. With ISOSYN Advanced Technology, it delivers excellent performance in both new, advanced engines meeting the latest emissions and reliability standards and in engines equipped with technologies such as four-valve heads, supercharging or turbocharging, direct injection, shorter piston crowns, higher power density, intercooling, full electronic fuel and emissions management, selective catalytic reduction, exhaust gas recirculation, and diesel particulate filters.

Ursa® Super Plus EC SAE 10W-30

Ursa® Super Plus EC SAE 10W-30 is a heavy-duty engine oil designed for naturally aspirated and turbocharged four-stroke diesel engines, as well as four-stroke gasoline engines, where API CK-4 or API SN and SAE 10W-30 are specified. It is specifically formulated for 2017 greenhouse gas (GHG 17)–compliant diesel engines to support lower CO₂ emissions and improved fuel economy, as well as 2010-compliant low-emission diesel engines equipped with Selective Catalytic Reduction (SCR), Diesel Particulate Filters (DPF), and Exhaust Gas Recirculation (EGR) systems. Ursa Super Plus EC SAE 10W-30 is fully compatible with previous engine models and earlier diesel engine technologies.

Delo 400 XSP SAE 5W-40

Delo® 400 XSP SAE 5W-40 with ISOSYN® Advanced Technology is an API CK-4 heavy-duty engine oil formulated for both on-highway and off-highway applications. It is designed for 2017 greenhouse gas (GHG 17)–compliant diesel engines to support lower CO₂ emissions and improved fuel economy, as well as EPA 2010–compliant low-emission diesel engines equipped with Selective Catalytic Reduction (SCR), Diesel Particulate Filters (DPF), and Exhaust Gas Recirculation (EGR) systems. The oil is fully compatible with previous engine models and earlier API Oil Service Categories.

This mixed-fleet motor oil is recommended for naturally aspirated and turbocharged four-stroke diesel engines and four-stroke gasoline engines where API CK-4 or API SN and SAE 5W-40 are specified. It is formulated for severe service and a wide range of operating conditions and delivers exceptional performance with low-sulfur and ultra-low-sulfur diesel fuels. Delo 400 XSP SAE 5W-40 is suitable for both older engines and today’s most advanced low-emission designs.

GREASE (Chevron Bulk Lubricant Delivery)

Delo Grease ESI EP (Chevron Oil Products)

Delo Grease ESI EP is designed for extreme duty in a wide variety of on-highway and light duty off-road vehicle and equipment applications.

On-highway heavy duty trucks — This lubricant is perfect for a wide variety of Class 6 – 8 trucks in most chassis and wheel-bearing applications ranging from automatic centralized greasing systems (see Notes A and B) to wheel bearings operating near the high temperatures of disc brakes. This product is for most applications, from owner/operators to fleets (especially those considering extended service intervals of 30,000+ miles/48,000+ km or equivalent hours).

Light Duty Off-Road vehicles — Whether the application is in logging, agriculture or utilities, this grease will perform. Use it in tractors, cherry pickers or any of a number of light duty off-road vehicles.

Automobiles — Delo Grease ESI EP is an exceptional lubricant for high-temperature wheel bearings and other high performance automotive applications.

Note A: Delo Grease ESI EP is designed using high viscosity base oils. These oils offer excellent protection in severe-duty, high shock load conditions where typical ambient temperatures are above -32°C (-25°F). Before using in applications involving onboard automatic grease dispensing systems in severe cold climate conditions, you should first consult with your equipment OEM specialist or Chevron Lubrication Specialist.

Chevron Ultra-Duty Greases EP (Chevron Oil Products)

Chevron Ultra-Duty Greases EP are recommended for use in automotive and industrial equipment operating under most conditions except where very high operating temperatures are encountered.

Typical applications include mining equipment, construction equipment, material handling equipment, marine deck equipment and deck cranes, oil field and offshore drilling equipment, paper machines, dredging equipment, logging equipment, and rock quarry equipment operating in water, mud, or dusty conditions.

• Shock load protection
• Load-carrying protection
• Corrosion and rust protection
• Water resistant
• Maximum service lubrication

HYDRAULIC FLUID

Rando HD ISO 32, 46, or 68 are recommended for:

• Vane-, piston-, or gear-type pumps, especially where pressures exceed 1000 PSI.
• Lightly loaded reciprocating compressors.

Rando HD ISO 100, 150, 220, or 320 are recommended for applications where AGMA rust and oxidation inhibited oils are required:

• Hydraulic equipment reduction gears where EP is not required.
• Plain and anti-friction bearings. Call today for Same Day and Local Lubricant Delivery.

Delo TorqForce 

Delo TorqForce products are high performance lubricants designed for use in transmissions, final drives, and hydraulic systems requiring a fluid meeting Caterpillar TO-4 or Allison C-4 requirements. They are also recommended for transmission and hydraulic systems manufactured by Dana Powershift, Komatsu, Komatsu Dresser, Tremec/TTC, Vickers and ZF. They are manufactured using highly refined base oils, detergents, dispersants, oxidation and corrosion inhibitors, antiwear and extreme pressure agents, and a foam suppressant. Delo TorqForce products are designed for both newly developed and older model drive train components. They offer excellent friction retention, wear control, seal compatibility, oxidation stability, and viscosity stability. The frictional characteristics of the fluid are retained over the life of the lubricant. Delo TorqForce products are formulated to help protect against wear, even in severe service conditions and under high loads. They help protect precision parts against wear under high load conditions by controlling the formation of corrosion, varnish, and sludge. Delo TorqForce products are compatible with new and traditional seal and clutch materials. Call today for Same Day and Local Lubricant Delivery.

GEAR OIL

Delo Syn-Trans HD (Chevron Oil product) is recommended for service fill of heavy duty manual transmissions, such as those manufactured by Eaton, Meritor, and Mack.

• This product is not recommended for use as an engine crankcase oil.
• Extended drain capabilities
• Proven field performance for on-highway drain intervals of 500,000 miles and greater.
• Excellent thermal and oxidation stability
• The synthetic hydrocarbon base oil used in this product provides outstanding stability.
• A high viscosity index and low pour point
• The performance of the synthetic hydrocarbon base stock provides extremely broad operating temperature ranges when compared with conventional mineral oil-based lubricants.

Delo® Syn-Gear HD (Chevron Oil product) gear lubricant is a heavy-duty, extreme pressure, multigrade automotive gear lubricant. It is manufactured from synthesized hydrocarbon base fluids which have excellent thermal and oxidation stability, a high viscosity index, and a low pour point. The low pour point of Delo Syn-Gear HD imparts maximum lubrication during startup at subzero temperatures, while its improved viscosity-temperature characteristics provide dependable lubrication at high temperatures. Low frictional losses in the lubricant film and minimal churning losses due to lower bulk oil viscosity lead to reduced operating temperatures when compared to conventional gear lubricants. Call today for Same Day and Local Lubricant Delivery.