Rando HD ISO 32, 46, or 68 are recommended for:
Vane-, piston-, or gear-type pumps, especially where pressures exceed 1000 psi.
Lightly loaded reciprocating compressors.
Rando HD ISO 100, 150, 220, or 320 are recommended for applications where AGMA rust and oxidation inhibited oils are required:
Hydraulic equipment reduction gears where EP is not required.
Plain and anti-friction bearings.
Delo TorqForce products are high performance lubricants designed for use in transmissions, final drives, and hydraulic systems requiring a fluid meeting Caterpillar TO-4 or Allison C-4 requirements. They are also recommended for transmission and hydraulic systems manufactured by Dana Powershift, Komatsu, Komatsu Dresser, Tremec/TTC, Vickers and ZF. They are manufactured using highly refined base oils, detergents, dispersants, oxidation and corrosion inhibitors, antiwear and extreme pressure agents, and a foam suppressant. Delo TorqForce products are designed for both newly developed and older model drive train components. They offer excellent friction retention, wear control, seal compatibility, oxidation stability, and viscosity stability. The frictional characteristics of the fluid are retained over the life of the lubricant. Delo TorqForce products are formulated to help protect against wear, even in severe service conditions and under high loads. They help protect precision parts against wear under high load conditions by controlling the formation of corrosion, varnish, and sludge. Delo TorqForce products are compatible with new and traditional seal and clutch materials.